Sakai Kikumori - Tomoshibi - White #2 - Yanagiba - 300mm - Ho Wood Handle
Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Yanagiba
Edge Length: 298mm
Blade Height: 40mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Right-Handed D-Shaped
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Horn Ferrule
Total Length: 450mm
Spine Length: 305mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 199g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Yanagiba
Edge Length: 298mm
Blade Height: 40mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Right-Handed D-Shaped
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Horn Ferrule
Total Length: 450mm
Spine Length: 305mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 199g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Original: $250.00
-65%$250.00
$87.50Description
Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Yanagiba
Edge Length: 298mm
Blade Height: 40mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Right-Handed D-Shaped
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Horn Ferrule
Total Length: 450mm
Spine Length: 305mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 199g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
